






Supplies:
-frames (thrifted for a dollar a piece...try to find a sturdy quality frame made from solid wood, the plastic ones are a headache)
-sandpaper
-At least 5/32 thick cork board (I recommend buying in a flat state NOT in a roll) - i fyou buy rolled then you will need tape or a hot glue gun
-exacto knife + memory pad or scissors
Instructions:
1. sand down the frames very well to get off the finish.
2. spray paint and let dry
3. take the back piece or the glass and trace around it on some corkboard.
4. cut out the cork board with an exacto knife on memory board or with some scissors.
5. If you used rolled cork board (it will work against you in staying flat) you will have to hot glue the cork to the backing of the frame or sturdy tape. If your cork if flat and thick enough you will be able to just lay it in there.
6. place inside the frame, secure it in place and done!

No comments:
Post a Comment